Ricoh M160 Service Manual page 343

SC No. Level
SC No. Level
SC876-99 D
SC No. Level
SC877-00 B
SM
Error Name/Error Condition/Major Cause/Solution
An error was detected in the acquisition or configuration of the
log data at power on or during machine operation.

Only the NV-RAM has been replaced with one previously
used in another machine.

Only the HDD has been replaced with one previously used
in another machine.

Attach the original NV-RAM.

Attach the original HDD.

With the configuration that caused the SC, initialize the
HDD (SP5-832-004).
Error Name/Error Condition/Major Cause/Solution
Log Data Error 99
An error was detected in the acquisition or configuration of the
log data at power on or during machine operation.
Other causes
-
Error Name/Error Condition/Major Cause/Solution
Data Overwrite Security card error
The "Auto Erase Memory" function of the Data Overwrite
Security is enabled but it cannot be executed.

Data Overwrite Security option SD card is broken.

Data Overwrite Security option SD card has been removed.

If the SD card is broken, prepare a new Data Overwrite
Security option SD card and replace the NVRAM.

If the SD card has been removed, turn the main power off
and reinstall a working Data Overwrite Security option SD
card.
6-99
Service Call
M160/M161