5-844-007 PnP Serial Number
5-844-008 Mac Supply Level
5-844-100 Notify Unsupported
[Delivery Server Setting]
5845
These are delivery server settings.
5-845-001 FTP Port No.
5-845-002 IP Address (Primary)
5-845-006 Delivery Error Display Time
SM Appendix
[ - / - / - ]
Sets the serial number to be used by
the USB PnP when "Function Enable
(Level 2) set so the USB Serial No. can
have a common name (SP5-844-005).
Make sure that this entry is the
same as the serial number in use.
C*
At initialization the serial number
generated from the model name is
used, not the setting of this SP
code.
At times other than initialization,
the value set for this SP code is
used.
[0 or 1 / 1 / 1/step]
C*
0: OFF
1: ON
C*
[0 or 1 / 1 / 1/step]
C*
[0 to 65535 / 3670 / 1/step]
[000.000.000.000 to 255.255.255.255 /
- / 1/step]
Use this SP to set the Scan Router
C*
Server address. The IP address under
the transfer tab can be used with the
initial system setting.
[0 to 999 / 300 / 1sec/step]
Use this setting to set the length of time
that the message is shown when a test
C*
error occurs during document transfer
with the NetFile application and an
external device.
3-119
Main SP Tables-5
M160/M161