Ricoh M160 Service Manual page 349

SC No. Level
SC No. Level
SC991-00 C
SC No. Level
SC992-00 D
SM
Error Name/Error Condition/Major Cause/Solution

Incorrect argument

Incorrect internal parameter

Insufficient working memory

Abnormal performance caused by an error that cannot be
detected in normal SC detection due to hardware
specifications.

Turn the main power switch off and on.

Reinstall the software of the controller board.

Reinstall the software of the engine board.
Error Name/Error Condition/Major Cause/Solution
Software continuity error
The software has attempted to perform an unexpected
operation. (However, the process can continue running if
recovery processing is carried out.)

Incorrect argument

Incorrect internal parameter

Insufficient working memory

May have resulted from an error that cannot be detected by
the hardware using normal SC detection.
Not required
Error Name/Error Condition/Major Cause/Solution
Undefined SC error
An error that is not controlled by the system occurred (the error
does not come under any other SC code).
A SC code used in the previous machine was applied
erroneously.
Turn the main power switch off and on.
6-105
Service Call
M160/M161