Ricoh M160 Service Manual page 476

5-074-093 Application Screen ID
[Copy:LT/LG Sizes Setting]
5076
Enables or disables the Copy LT/LG consolidation setting.
5-076-001 0:OFF 1:ON
5081 [ServiceSP Entery Code Setting] DFU
5-081-001 -
[LED Light Switch Setting]
Specifies whether the alert LED is lit or not when toner near end condition
5083
is detected. (This does not change the toner near end condition indication
in the operation panel LCD.)
5-083-001 Toner Near End
[Non-Std. Paper Sel.]
5112
Selects On/Off to allow the setting of the custom size.
5-112-001 (0:OFF 1:ON)
SM Appendix
[0 to 255 / 0 / 1/step]
Sets the display category of the
C*
application that is specified in the
SP5075-001
[0 or 1 / 1 / 1/step]
C* 0: Disabled
1: Enabled
C* [ - / - / - ]
[0 or 1 / 0 / 1/step]
C* 0: OFF
1: ON
[0 or 1 / 1 / 1/step]
C* 0: OFF
1: ON
3-63
Main SP Tables-5
M160/M161