Ricoh M160 Service Manual page 733

Printer Switch 08 - Not used (Do not change the factory settings.)
No Function
Paper size selection priority
0* 0: Width
1: Length
Paper size selected for printing
A4 width fax data
1*
0: 8.5" x 11" size
1: A4 size
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on
reports
Bit 4 Bit 3
3-4 0 0
0 1
1 0
M160/M161 Fax Option
Printer Switch 0E (SP No. 1-103-015)
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction is
selected first.
This switch determines which paper size is
selected for printing A4 width fax data, when
the machine has both A4 and 8.5" x 11" size
paper.
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message
(Substitute Reception is used).
After a larger size of paper is set in a cassette,
the machine automatically prints the fax
message.
"Same size" means the sample image is
Setting
printed at 100%, even if page separation
occurs.
The upper half
User Parameter Switch 19 (13H) bit 4 must be
only
set to "0" to enable this switch.
Refer to Detailed Section Descriptions for more
50% reduction
(sub-scan only) on this feature.
Same size
77
Bit Switches - 2
Comments
SM