Table of Contents
Advertisement
Rx Bcast Packet:
Rx Mcast Packet:
5.5.2 Port Control
In Port control you can configure the settings of each port to control the connection parameters, and the status of each
port is listed beneath.
The page includes the following fields:
Object
Port:
State:
Negotiation:
The counts of broadcast packet.
The counts of multicast packet.
Figure 5-19 Port Control interface
Description
Use the scroll bar and click on the port number to choose the port to be
configured.
Current port state. The port can be set to disable or enable mode. If the port state
is set as 'Disable', it will not receive or transmit any packet.
Auto and Force. Being set as Auto, the speed and duplex mode are negotiated
automatically. When you set it as Force, you have to set the speed and duplex
mode manually.
User's Manual of ISW-1022M
55
Advertisement
Table of Contents
