System Configuration; Software Makeup - Mitsubishi Electric MELSEC System Q Installation Manual

2. SYSTEM CONFIGURATION

2. SYSTEM CONFIGURATION
2.1

Software Makeup

Control program design
environment
Maintenance engineering
environment
User application design
environment
Each software package is made up of the following software.
(1) SW3RNC-GSVE: Motion controller startup support software packages
The packages and versions of SW3RNC-GSVE Ver. H are as indicated in
Table 2.1.
Table 2.1 Packages of SW3RNC-GSVE Ver. H
Type
SW3RN-GSV13P Transfer/assembly
*1 software
SW3RN-GSV22P Automatic machine
*2 software
SW3RN-GSV43P Machine tool peripheral
*3 software
SW3RN-GSV51P Special-purpose robot
*4 software
SW3RN-CAMP Cam data creation
*5 software
SW3RN-LADDERP
*6
(For Office 97)
Ladder editing software
SW20RN-LADDERP
*6
(For Office 2000)
SW3RN-DOCPRNP
*7
(For Office 97)
Document printing
SW20RN-DOCPRNP software
*7
(For Office 2000)
SW3RN-DOSCP Digital oscilloscope
*8 software
SW3RN-SNETP SSCNET communication
*9 system software
*1 Hereafter abbreviated to GSV13P.
*2 Hereafter abbreviated to GSV22P.
*3 Hereafter abbreviated to GSV43P.
*4 Hereafter abbreviated to GSV51P.
*5 Hereafter abbreviated to CAMP.
*6 Hereafter abbreviated to LADDERP.
*7 Hereafter abbreviated to DOCPRNP.
*8 Hereafter abbreviated to DOSCP.
*9 Hereafter abbreviated to SNETP.
*: Among the above software packages marked *1 to *5, install the necessary one according to the
controller OS used.
Install either of the software packages marked *6, *7 depending on the operating environment.
You cannot install and operate SW3RN-[ ][ ]P and SW20RN-[ ][ ]P together.
Product Name
Supports programming, monitor and test for
controller OS SV13.
Supports programming, monitor and test for
controller OS SV22.
Supports programming, monitor and test for
controller OS SV43.
Supports programming, monitor and test for
controller OS SV51.
Creates the cam patterns for cam control of
controller OS SV22.
Needed for use of cams.
Supports ladder programming of the motion
controller and monitor and test of the PC
CPU.
Converts the program and parameter data
set on GSV13P, GSV22P,GSV43P, GSV51P
or CAMP into the Word/Excel file format, and
supports printing them.
Converts the sampling data saved on
DOSCP into the Excel file format, dumps and
graphs them, and supports printing them.
Offers the maintenance engineering
environment.
Shows the motion system control status in
terms of waveform and effective for survey,
troubleshooting and analysis.
Links the motion controller and personal
computer by SSCNET or RS232C
communication to access data.
When SSCNET communication is used,
supports the communication API designed for
user application software (VB, VC++).
2 − 1
Description Version
00E
00E
00D
00B
00E
00F
00B
00H
00D
00E
00J