How To Check The System Resources - Mitsubishi Electric MELSEC System Q Installation Manual

4. SSCNET COMMUNICATION DRIVERS
4.2

How to Check the System Resources

This section explains how to check the free areas of the system resources such as
IRQ Level, Memory Base Address and I/O Port Address.
(1) For Windows NT
Refer to the Windows NT diagnostics and check the free areas of the system
resources.
POINT
The resource use state may be described in the manual of the personal
computer.
In this case, refer to the manual.
1) Choose and click [Programs]-[Administrative Tools
(Common)]-[Windows NT Diagnostics] in the Start
menu.
2) The Windows NT Diagnostics window appears.
Click [Resources].
Click [IRQ], [I/O Port] and [Memory] to check the free
areas.
[IRQ] .................. Check the IRQ level.
[I/O Port] ............ Check the I/O Port Address.
[Memory] ............ Check the Memory Base Address.
*1 When using the interface board, you need not
check the I/O Port Address.
*2 For details of the Windows NT diagnostics, refer
to the Windows NT manual.
4 − 7