Simultaneous Execution Of Sw3Rn-Gsv[ ][ ]P And Sw6Rn-Gsv[ ][ ]P - Mitsubishi Electric MELSEC System Q Installation Manual

3. INSTALLATION AND UNINSTALLATION
3.4.4

Simultaneous execution of SW3RN-GSV[ ][ ]P and SW6RN-GSV[ ][ ]P

SW3RN-GSV[ ][ ]P and SW6RN-GSV[ ][ ]P cannot be used simultaneously.
If the operation described below is attempted, the following error message is dis-
played in response to the GSV[ ][ ]P started later and startup fails.
[Operation]
• Starting SW3RN-GSV[ ][ ]P and SW6RN-GSV[ ][ ]P simultaneously from menu
• CAMP (Cam Data Setting) for executing both JUMP icons to SW3RN-GSV[ ][ ]P
and SW6RN-GSV[ ][ ]P
Do not perform above operations.
SW3RN-GSV[ ][ ]P and SW6RN-GSV[ ][ ]P cannot be executed simultaneously.
Start either application only.
Jump icon to
SW6RN-GSV22P
3 − 24
Jump icon to
SW3RN-GSV22P