Mitsubishi Electric MELSEC System Q Installation Manual page 81

4. SSCNET COMMUNICATION DRIVERS
To next page
(2) For Windows 98
1) Select the My Computer icon on the desktop and
right-click.
The pop-up menu appears.
Click [Properties] from the pop-up menu.
2) The "System Properties" window appears.
Click [Device Manager].
Choose "Other devices" and double-click.
Check to see if there are the following devices in
"Other devices".
• SNETP DRIVER (Transient CH. 0)
• SNETP DRIVER (Cyclic CH. 0)
• SNETP DRIVER (Transient CH. 1)*
• SNETP DRIVER (Cyclic CH. 1)*
• SNETP DRIVER (Fast Fresh: A30BD-PCF Board)
*These devices appear only when CH. 1 has been
registered in driver registration.
When CH. 1 is not used, they are not displayed
since they have not been registered.
3) Choose "SNETP DRIVER (Fast Fresh: A30BD-PCF
Board)" and click [Properties].
4) The "SNETP DRIVER (Fast Fresh: A30BD-PCF
Board) Properties" window appears.
Turn on "Disable in this hardware profile" under
"Device usage" and click [OK].
4 − 28