Created System Directories - Mitsubishi Electric MELSEC System Q Installation Manual

3. INSTALLATION AND UNINSTALLATION
3.3

Created System Directories

Depends on the drive and
directory set at installation.
Use the motion controller startup support
software (GSV[ ][ ]P/DOSCP/SNETP
/CAMP/DOCPRNP/GSVHELP) after
installing them into the same folder.
Use LADDERP after installing it into the
same drive.
Installing GSV13P, GSV22P, GSV43P, GSV51P, SNETP, DOSCP, CAMP,
DOCPRNP, LADDERP and/or GSVHELP creates the directories as shown below.
Drive C Program Files Gsve
Servome
Snetpe
Came
Docprnpe
Gsvhelpe
Gpp Svwine
Sysgsv13p Defaultsys
Sysgsv22p Default
Sysgsv43p
Sysgsv51p Help
Usr
Sys
Usr
Defaultsys
Graphics
Temp
Gsv13p
Gsv22p
Gsv43p
Gsv51p
Camp
Ladderp
Doscp
Snetp
Docprnp
3 − 16
08
SW3RN-GSV13P
SW3RN-GSV22P
32
SW3RN-GSV43P
SW3RN-GSV51P
ProgEdit*1
*1: Folder of Sysgsv43p
Svdata
is not created.
Temp
SW3RN-DOSCP
SW3RN-SNETP
SW3RN-CAMP
SW3RN-DOCPRNP
SW20RN-DOCPRNP
*2: Create a folder of DOCPRNP
installed according to the
operating environment.
SW3RNC-GSVHELPE
SW3RN-LADDERP
SW20RN-LADDERP
*3: Create a folder of LADDERP
installed according to the
operating environment.