What Is In The Box; System Requirements; Key Features And Standards - NETGEAR ProSafe WNAP320 Reference Manual

ProSafe Wireless-N Access Point WNAP320 Reference Manual

What Is In the Box?

The product package should contain the following items:
• ProSafe Wireless-N Access Point WNAP320
• Power adapter and cord (12 VCD, 1.0A)
• Straight-through Category 5 Ethernet cable
• NETGEAR WNAP320 Wireless-N Access Point Installation Guide
• Resource CD, which includes this manual
• Wall-mount kit made up of brackets and hardware
Contact your reseller or customer support in your area if there are any missing or damaged
parts.
Refer to the NETGEAR website at
number of customer support in your area. You should keep the Installation Guide, along with
the original packing materials, and use the packing materials to repack the wireless access
point if you need to return it for repair.
To qualify for product updates and product warranty, NETGEAR encourages you to register
on the NETGEAR website at http://my.netgear.com/registration/login.aspx.

System Requirements

Before installing the wireless access point, make sure that your system meets these
requirements:
• A 10/100/1000 Mbps local area network device such as a hub or switch
• The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the
package, or one like it
• A 100–120V, 50–60 Hz AC power source
• A Web browser for configuration, such as Microsoft Internet Explorer 6.0 or later, or
Mozilla 1.5 or later
• At least one computer with the TCP/IP protocol installed
• An 802.11b/g- or 802.11n/g-compliant device, such as the NETGEAR WNDA3100
wireless adapter

Key Features and Standards

The ProSafe Wireless-N Access Point WNAP320 is easy to use and provides solid wireless
and networking support. It also offers a wide range of security options.
http://kbserver.netgear.com/main.asp
for the telephone
Chapter 1. Introduction | 7