DataCard Sp35 Installation Manual page 97

File name
LandscapeBlockTopcoatBack.bmp
PortraitBlockPrintFront.bmp
PortraitBlockPrintBack.bmp
PortraitBlockTopcoatFront.bmp
PortraitBlockTopcoatBack.bmp
Each bitmap has a sample image, to help you understand the orientation when you open it. See
customized blocking area"
If the side of the card for which you want customized blocking includes more than one blocking area, you need to
create all blocking areas in the bitmap file. Datacard ID Works® ID software allows you to specify the following
SP Series Info Central: Setup
Dimensions (Height by Width)
1013 by 638 pixels
3.37 by 2.125 inches
85.6 by 53.98 mm.
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
638 by 1013 pixels
2.125 by 3.37 inches
53.98 by 85.6 mm.
for the steps to follow when changing one of these bitmaps.
Comments
Blocks topcoat on the back of a
card with landscape orientation.
Blocks printing on the front of a
card with portrait orientation.
Blocks printing on the back of a
card with portrait orientation.
Blocks topcoat on the front of a
card with portrait orientation.
Blocks topcoat on the back of a
card with portrait orientation.
"Setting a
27