DataCard Sp35 Installation Manual page 139

20
e Click the icon for drive C:\. The status line shows the available disk space, such as:
— 48.2MB (Disk free space: 302MB)
f Make sure the Disk free space is 40MB or greater.
g Remove additional files if needed.
8 Run the Disk Defragment program if one is installed on the PC:
a From the Windows task bar, select Start, Programs, Accessories, System Tools and then Disk
Defragmenter.
b Select the drive to scan, usually C:\.
c Select OK to run the program.
d When the program completes, a message appears.
e Select OK to close the program.
9 With all applications closed, from the Windows task bar, select Start and then Shutdown.
10 From the Shut Down Windows box, select Restart the Computer and then Yes.
11 If you were printing cards, restart the ID software (such as Preface or ID Works) and send the card to print
again.
Other PC problems
• On Windows 2000 and XP, the PC can appear to have maintenance problems when the user does not have the
necessary permissions. To set permissions, see "Setting Printer Permissions" in
• If a Datacard® printer driver was installed on this PC and then removed, you can run the Cleanup Utility to
remove any files that Windows does not remove. See the "Running the Cleanup Utility" in
Driver.
• If the print processor is not the correct one, the PC can appear to have problems. Make sure that the "Print
Processor" or the "Print using the following driver" selection in Properties is Smart Driver™.
Installing the Driver.
Reinstall the Printer
SP Series Production e-Guide