DataCard Sp35 Installation Manual page 51

50
Network: A network must be set up and working before you begin. See
Host PC: The host PC has the printer attached to it. The host PC must be connected to the network. For Windows
2000, Windows XP, and Windows NT, you need to set up users and access.
Port connection: The printer can be connected to a USB port on the host PC, or can have a direct network
connection to the host PC, in the same way as though you were using it just from the host PC.
Client PC: The client PC is connected to the host PC over the network.
Setting up printing sharing
To set up printer sharing, do the following:
1 Install the printer driver on the host PC. See the
2 With the printer power on, change settings to reflect your card design, including printer features such as ribbon
type and magnetic stripe settings. Record the settings so you can also make those settings on the client PC.
3 Enable printer sharing. See Windows help for more information.
4 For Windows XP, Windows 2000, and Windows NT, set up an account for each user.
— At the host PC set up accounts for users who log onto the host PC and for users who log onto the client
PC(s).
— At the client PC set up an account for the user who logs onto the client PC.
5 For Windows XP and Windows 2000, grant users' permission to the printer from the host PC, including:
— Client PC users who have Print permission to the printer.
— Host PC users who also have Print, Manage Printers, and Manage Documents permissions to the printer.
— Host PC users (if any) who are denied permission to the printer.
6 For Windows NT, grant users' permission to the printer from the host PC, including:
— Client PC users who have Print permission to the printer.
— Host PC users who also have Full Control permission to the printer.
— Host PC users who have No Access permission to the printer.
7 Make sure client PC users can access the host PC from the network.
8 Install the printer driver on the client PC. See the following procedure.
9 At the client PC, set the printer type in the Properties, Printing Preferences, or Default Document Properties
dialog box.
10 Change driver settings on the client PC to match settings on the host PC.
Installing the printer driver on the client PC
Tips for success
• If an Express Class v1.x, Select Class v2.x or v3.x, Magna Class v2.x, or ImageCard IV printer driver is
installed on the client PC, delete the printer driver and restart Windows before continuing.
"Network installation"
"Installing the driver" for more information.
for more information.
SP Series Install e-Guide