Mitsubishi QD51 Programming Manual page 505

11 INSTRUCTIONS AND FUNCTIONS
Processing Code 533
Only Element position
applicable
Format 1
to QD51
%(0)
(-R24)
%(1)
%(2)
%(3)
%(4)
%(5)
11 - 335
Writing data to the buffer memory of the intelligent functional module of the Q/QnA
series PLC CPU
Control table format definition
Format 2 Format 3
• • • • • • • • • • • • •
%(0) %(0)
%(1) %(1)
%(2) %(2)
%(3) %(3)
%(4)
%(4) %(5)
%(5) %(6)
%(6) %(7)
%(7) %(8)
%(8) %(9)
• It is possible to write data to buffer memory of the intelligent functional module of
the Q/QnA series PLC CPU using this code.
• Specify the following data for <control table>.
Item
Station number
Control table
Network number
Station number
Detailed error code
Requested CPU
Processing code
Starting I/O number
Buffer memory Lower
starting address
Higher
Number of points
MELSEC-Q
Description
Specify the station number of the PLC.
Specify a format 2 control table.
Specify the network number.
Specify the station number of the PLC.
Detailed error codes are stored here.
Specify the requested CPU.
Specify the processing code.
Specify the starting I/O number of the
intelligent functional module.
Specify the starting I/O address of the
intelligent functional module's buffer
memory.
Specify the number of points to be
written.
11 - 335