Console ( Sets The Number Of Display Lines Of The Console Screen ) - Mitsubishi QD51 Programming Manual

11 INSTRUCTIONS AND FUNCTIONS
CONSOLE
Instruction
• Sets the number of display lines of the console screen.
CONSOLE <number of lines>
Syntax
number of lines
CONSOLE 25
Examples
• The CONSOLE instruction sets the number of display lines of the console according to the
Description
console screen.
• The initial condition of the CONSOLE instruction is set according to the console set by
MODE SW2.
• The following values are used when VG-620, VT-382, and A7PHP are used:
• Normal screen scroll operation is not performed if the specified number of lines differs from
the number of display lines of the console.
11 - 32
VG-620
VT-382
IBM/AT compatible, PC-9800, A7PHP, A7LMS
CONSOLE
• • • • Specify the number of display lines as 20 through 32
depending on the console used.
• • • • Displays 25 lines.
MELSEC-Q
• • • • 24 lines
• • • • 24 lines
• • • • 25 lines
11 - 32