Mitsubishi QD51 Programming Manual page 457

Logic controller
Hide thumbs Also See for QD51:
Table of Contents

Advertisement

11 INSTRUCTIONS AND FUNCTIONS
11 - 287
Format 2 control table
%(0)
• • • • • •
Format 2 control table
%(1)
• • • • • •
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2)
• • • • • •
Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
%(3)
• • • • • •
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4)
• • • • • •
Processing code
%(5)
• • • • • •
Specify the program to be written.
Always specify 1 for PLC CPUs in which subprograms
cannot be used.
%(6)
• • • • • •
Specify the head step number of the program to be written.
The maximum number of steps in the sequence program is
the capacity set by the parameter.
%(7)
• • • • • •
Specify the number of steps to be written.
The allowable specification range is from 1 to 64 steps.
• Specify 256.
• Specify 8.
• To write the main program
• To write a subprogram
(subprogram 1)
• To write subprogram 2
• To write subprogram 3
MELSEC-Q
• • • • • •
Specify 1.
• • • • • •
Specify 2.
• • • • • •
Specify 3.
• • • • • •
Specify 4.
11 - 287

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad51h-s3Qd51-r24A1sd51s

Table of Contents