Mitsubishi QD51 Programming Manual page 401

11 INSTRUCTIONS AND FUNCTIONS
11 - 231
Format 3 control table
%(0) • • • • • • Format 3 control table
%(1) • • • • • • Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2) • • • • • • Specify the station number of the PLC CPU whose type
name is to be read.
See Section 4.2.2 for the allowable specification range.
%(3) • • • • • • Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4) • • • • • • Processing code
%(5) • • • • • • Specify the requested CPU.
%(6) • • • • • • Specify the device using the defined code.
%(7) • • • • • • Specify the device number (lower digit) of the device
specified in %(6). See Section 4.2.5 for the allowable
specification range.
%(8) • • • • • • Specify the device number (higher digit) of the device
specified in %(6). See Section 4.2.5 for the allowable
specification range.
%(9) • • • • • • Specify the number of device points to be read, including
the devices specified in %(6), %(7), and %(8).
(a) Bit devices
(b) Word devices
• Specify 257 (&H101).
• Specify 515 (&H203).
• PLC No.1 • • • • • •
• PLC No.2 • • • • • •
• PLC No.3 • • • • • •
• PLC No.4 • • • • • •
• Control PLC • • • • • •
• See Section 4.2.5 for the code numbers.
• Q series CPU
• QnA series CPU
• Q series CPU
• QnA series CPU
MELSEC-Q
992 (&H3E0)
993 (&H3E1)
994 (&H3E2)
995 (&H3E3)
1023 (&H3FF)
1 to 15360 points
1 to 7680 points
1 to 960 points
1 to 480 points
11 - 231