Table of Contents
Advertisement
11 INSTRUCTIONS AND FUNCTIONS
LLIST
Instruction
• The entire program area or a portion of the program within the specified range will be
printed to the printer.
LLIST
Syntax
line number 1
line number 2
LLIST
Examples
LLIST 100
LLIST 200-
LLIST –150
LLIST 300-1000
• The LLIST instruction prints the entire program or a portion of the program within the
Description
specified range to a printer.
• When the LLIST instruction is complete, BASIC will wait for an instruction.
• The output printer must be specified with the ZLDV instruction.
11 - 130
LLIST
[ <line number 1> [- [ <line number 2> ] ] ]
• While printing is in progress, all keys will not be accepted.
To stop printing, turn off the printer or set it to the offline status.
The printer output process will stop after approximately 5 seconds.
REMARK
See the ZLDV and LIST instructions, and Section 3.2.3.
• • • •
Specify the line number to start printing to the printer.
• • • •
Specify the line number to stop printing to the printer.
• • • •
Prints all lines to the printer.
• • • •
Prints only line number 100 to the printer.
• • • •
Prints from line number 200 to the end of the
program to the printer.
• • • •
Prints from the beginning to line 150 to the printer.
• • • •
Prints from line 300 to line 1000 to the printer.
MELSEC-Q
11 - 130
Advertisement
Table of Contents
