Table of Contents
Advertisement
11 INSTRUCTIONS AND FUNCTIONS
11 - 268
Format 2 control table
%(0)
• • • • • •
Format 2 control table
%(1)
• • • • • •
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2)
• • • • • •
Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
%(3)
• • • • • •
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4)
• • • • • •
Processing code
%(5)
• • • • • •
Specify the device processing unit.
%(6)
• • • • • •
Specify the number of device points to be written. The
allowable specification ranges for the number of points are
as follows:
• Specify 256.
• Specify 3.
• When writing in bit units • • • • • 1
• When writing in word units • • • 2
• When bit units are specified
• Bit devices
• When word units are specified
• Bit devices
• Word devices
MELSEC-Q
1 to 20 points
1 to 10 words
(16 to 160 points, in units of
16 points)
1 to 10 points
11 - 268
Advertisement
Table of Contents
