Table of Contents
Advertisement
11 INSTRUCTIONS AND FUNCTIONS
11 - 293
Format 2 control table
%(0)
• • • • • •
Format 2 control table
%(1)
• • • • • •
Specify the network number of the network to be accessed.
See Section 4.2.2 for the allowable specification range.
%(2)
• • • • • •
Specify the station number of the PLC CPU to which data is
written.
See Section 4.2.2 for the allowable specification range.
%(3)
• • • • • •
Detailed error codes are stored here.
See Appendix 4.4.2 for the details about the error codes.
%(4)
• • • • • •
Processing code
%(5)
• • • • • •
Specify the microcomputer program to be written.
Always specify 1 for PLC CPUs in which sub-
microcomputer programs cannot be used.
%(6)
• • • • • •
Specify the head address of the microcomputer program to
be written.
The maximum number of bytes in the microcomputer
program that can be specified is the capacity set by the
parameter.
%(7)
• • • • • •
Specify the number of bytes to be written.
The allowable specification range is from 1 to 128 bytes.
• Specify 256.
• Specify 9.
• To write the main
microcomputer program
• To write a sub-
microcomputer program
MELSEC-Q
• • • • • •
Specify 1.
• • • • • •
Specify 2.
11 - 293
Advertisement
Table of Contents
