The Basics Of Ad51H-Basic; Preparation To Use Ad51H-Basic - Mitsubishi QD51 Programming Manual

2 THE BASICS OF AD51H-BASIC

2 THE BASICS OF AD51H-BASIC

2.1 Preparation to Use AD51H-BASIC

In order to edit or execute a program using AD51H-BASIC (hereinafter referred to as
BASIC), it is necessary to change the mode of the communication module to edit
mode, then connect the console, and start up BASIC. The procedures and the relevant
reference manuals are shown below.
(1) Setting the communication module and connecting the console.
(2) Console preparation
SW IVD-AD51HP
or
SW NX-AD51HP
(3) Editing and running BASIC programs can be started by using the
Execute
the START
instruction.
2 - 1
Perform settings and connections for each communication module.
Carry out the online programming items according to the Type SW IVD-
AD51HP/SW NX-AD51HP Software Package Operation Manual.
This is not necessary
when using a general-purpose
console.
START instruction in the system mode of the communication
module, according to the user's manual for each communication
module.
IBM/AT Compatible Personal Computer,
PC-9800 Series
S>START , Enter
MELSEC-Q
2
2 - 1