Ce Password Setting; Mode Change Menu; Setting Method - Konica Minolta 7145 Service Manual

CE PASSWORD SETTING

4. CE PASSWORD SETTING
Important:
• In order to prevent the malicious CE to access
data and to change settings of the machine,
ensure to change the CE password.
On key operator mode, if the enhanced security is
enabled, CE password must be input to verify the
CE to access the following service modes.
"36 mode"
"25 mode"
"47 mode"
Register a CE password by the following procedure.
A. Procedure
1. While the SW1 (main power switch) is ON, turn
OFF SW2 (sub power switch)
2. Turn the SW2 ON while pressing 2 and 5 of the
copy quantity setting buttons
CE password input request screen appears.
3. Enter default password "92729272".
On the LCD, basic screen for 25 mode
appears.
4. Press [5. Password setting] key.
Password setup screen appears.
5. Press [4. CE Password setting] key.
CE password input screen appears.
6. Enter new 8-digit CE password then press [Set]
key.
7. OFF/ON sub-switch to complete password input
procedure and to exit from 25 mode.
Note:
• Only alphanumerical keys can be used for the
password. Continuous single alphanumeric can-
not be used for the password.
• In order to change the registered password, in the
above step 3, enter current password and con-
tinue following steps.
• Do not use name, your birthday or employee
code number as the password since other people
can easily guess them.
• CE should not inform other people of the pass-
word.
2
7145 series Field Service Ver.4.0 Mar. 2004

5. MODE CHANGE MENU

5.1

Setting method

The following modes can be selected on the mode
change menu screen without turning OFF/ON the
power supply:
"1 Basic screen"
"2 36 mode"
"3 25 mode"
"4 Key operation mode"
"5 47 mode"
"6 Exit"
A. Procedure
1. Turn on SW1 (main power switch) and SW2
(sub power switch).
2. Keep pressing the
"Enter password for mode selection" appears.
3. Input 9272 as the password and press the
[START] key. (The password is fixed and cannot
be changed.)
4. Press the key of the mode to be selected on the
screen.
If enhanced security is enabled, enter CE pass-
word to access to "25 mode", "36 mode" and
"47 mode". Enter Key operator password to
access [Key operator mode].
5. To return to the "Mode Change Menu screen",
keep pressing the
Change Menu screen" appears.
6. When the adjustment ends, press [6. Exit] key
and the basic screen will appear.
1-4
∗
button until the message
∗
button until the "Mode