Konica Minolta 7145 Service Manual page 19

• Unplug the power cord from the wall outlet.
Drum cleaner (isopropyl alcohol) and roller cleaner (acetone-based) are
highly flammable and must be handled with care. A risk of fire exists.
• Do not replace the cover or turn the copier ON before any solvent remnants
on the cleaned parts have fully evaporated.
A risk of fire exists.
• Use only a small amount of cleaner at a time and take care not to spill any
liquid. If this happens, immediately wipe it off.
A risk of fire exists.
• When using any solvent, ventilate the room well.
Breathing large quantities of organic solvents can lead to discomfort.
[3] MEASURES TO TAKE IN CASE OF AN ACCIDENT
1. If an accident has occurred, the distributor who has been notified first must immediately take emergency measures to
provide relief to affected persons and to prevent further damage.
2. If a report of a serious accident has been received from a customer, an on-site evaluation must be carried out quickly
and KMBT must be notified.
3. To determine the cause of the accident, conditions and materials must be recorded through direct on-site checks, in
accordance with instructions issued by KMBT.
4. For reports and measures concerning serious accidents, follow the regulations given in "Serious Accident Report/
Follow-up Procedures".
[4] CONCLUSION
1. Safety of users and customer engineers depends highly on accurate maintenance and administration. Therefore,
safety can be maintained by the appropriate daily service work conducted by the customer engineer.
2. When performing service, each copier on the site must be tested for safety. The customer engineer must verify the
safety of parts and ensure appropriate management of the equipment.
DANGER : HANDLING OF SERVICE MATERIALS
SAFETY AND IMPORTANT WARNING ITEMS
S-9
1