Installation Procedure; Preparation; Environment - Ricoh Aficio 240W Service Manual

1. INSTALLATION PROCEDURE

1.1 PREPARATION

1.1.1 ENVIRONMENT

1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Ambient Dust:
6. If the installation area has air-conditioners or heaters, put the machine in a
location that agrees with these conditions:
a) Where there are no sudden temperature changes from low to high, or high
to low.
b) Where it will not be directly exposed to cool air from an air conditioner in
the summer.
c) Where it will not be directly exposed to reflected heat from a space heater
in the winter.
7. Do not install the machine in an area filled with gases that can cause corrosion.
8. Do not install the machine in areas higher than 2,000 m (6,500 ft) above sea
level.
9. Put the machine on a strong and level surface.
10. Do not install the machine in an area where there are frequent strong
vibrations.
SM
10°C to 30°C (50°F to 86°F)
15% to 90% RH
Less than 1,500 Lux (do not expose the machine
directly to light from the sun).
3
More than 30m /hr/person in the work area
3
Less than 0.10 mg/m
1-1
PREPARATION
B125