Ricoh Aficio 240W Service Manual page 200

JAM CODE TABLES
Code Meaning
DJ26 Original Exit Sensor 2
DJ27 Original Exit Sensor 3
DJ30 Next Original Time Limit
Maximum Length
DJ31
Exceeded
DJ32 Original Removed
DJ40 Original Stop
B125
Location
The original registration sensor detected
the leading edge and came ON. But the
P original exit sensor stayed OFF, a long
time after the leading edge should get to
the exit rollers.
The registration sensor detected the
P trailing edge and went OFF. But the
original exit sensor stayed ON.
The next original was set on the original
feed table too early. The wait time for
setting the next original did not become
expired. The original set sensor detected
P
the trailing edge of the first original. But
the paper set sensor detected the leading
edge of the next original before the IPU
received the scan end signal.
The length of the original was more than
P
the maximum length.
The original was removed before
scanning completed. The original set
sensor and original registration sensor
P
detected the leading edge. But the
registration sensor went OFF before the
set sensor went OFF.
The user pushed the Scanner Stop button
to remove the original.
P Note: This is recorded in the jam record
(the count for original jams by location
and most recent jams).
4-18
Comments
SM