Sc5Xxx - Ricoh Aficio 240W Service Manual

SC CODE DESCRIPTIONS

4.2.5 SC5XXX

Group 5 SC codes are related to:
• Paper feed
• Paper transport in the paper path
• Fusing
508 D Cutter Error
The left and right cutter HP
sensors stayed on or off more
than 2 seconds.
Temporary Solution
To use the machine until it is repaired, the customer can use the manual
feed tray as the default paper-feed source:
User Tools> 1 System Settings> 1 General Features> 17 Feed Start
Method> Bypass
520 D Main Motor Error
The lock signal goes LOW
after the motor starts and gets
to the set speed. If the main
motor lock signal stayed HIGH
for 5 seconds during motor
operation, the motor stopped
because of overloading.
521 D Drum Motor Error
The lock signal goes LOW
after the motor starts and gets
to the set speed. If the drum
motor lock signal stayed HIGH
for 5 seconds during motor
operation, the motor stopped
because of overloading.
B125
• Check the connections of the HP
sensors on the left and right side.
• Replace the HP sensors.
• Check that the motor drive path is not
overloaded.
• Replace the motor harness.
• Replace the motor.
• Check that the motor drive path is not
overloaded.
• Replace the motor.
4-6 SM