3. REPLACEMENT AND ADJUSTMENT
3.1 COMMON PROCEDURES
3.1.1 BEFORE WORKING ON THE MACHINE
[A]
Always remove these items before you start work on the machine:
[A]: Upper output stackers (x 2)
[B]: Copy exit selection lever (x 1)
[C]: Original output guides (x 6)
[D]: Upper output guide (x 1)
Lower output trays (x 3) (not shown)
Reinstallation
• The copy-exit selection lever must be up. In this position, the user can set the
paper feed exit on the operation panel with the "Upper Copy Output" key. This
key is disabled with the lever down and the copies always feed out at the rear.
SM
COMMON PROCEDURES
[B]
3-1
[C]
[D]
B125R913.WMF
B125