Local Area Network (Lan) Ethernet; Basic Specifications; Dip Switch Settings - SATO LC400e Series Operator's Manual

7.5 LOCAL AREA NETWORK (LAN) ETHERNET

Local Area Network (LAN) interface is an optional plug-in interface module that can be installed by the user. It
requires a driver that must be loaded onto the host computer and configured to support the TCP/IP network
protocol using a 10/100BaseT LAN connection.

7.5.1 Basic Specifications

Connector
Cable
Cable length
Power supply
Protocol
IP address
Subnet mask
Gateway address

7.5.2 DIP Switch Settings

SWITCH
1
2
3
4
LC400e Series Operator Manual
SPECIFICATIONS
RJ-45 Receptacle
10/100BaseT category 5
100 m or less
Powered from printer
Status3
Status4
Status5
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
DIP SWITCH SETTINGS
Reserved (setup prohibited).
LAN board EEPROM initialization (configuration).
Print configuration details on a label.
Print a self-diagnosis of the board onto a label.
Section 7: Interface Specifications
SETTING
Page 7-9