SATO LC400e Series Operator's Manual page 52

Section 3: Operation and Configuration
3.11 MAINTENANCE MODE (Cont'd)
MENU
CONT S/N
YES NO
CONT S/N
S/N 00000000
SERIAL NO
YES NO
SERIAL NO
S/N 00000000
PRINT SIZE
SMALL LARGE
TEST PRINT
PRESS FEED KEY
Page 3-28
MAINTENANCE MODE
This screen allows to set the serial number of the CONT board.
Press LINE button to toggle between YES and NO. Press FEED to set the serial
number.
The valid values of the serial number are in the range of 0 to 9 and A to Z.
*This menu is only for SATO authorized service personnel.
This screen allows to set the serial number of the printer.
Press LINE button to toggle between YES and NO. Press FEED to set the serial
number.
The valid values of the serial number are in the range of 0 to 9 and A to Z.
*This menu is only for SATO authorized service personnel.
Allows the selection of large (104 mm, 4.09") or small (30 mm, 1.18") font print size
for the printing of a factory test page. These are the only two options.
Pressing FEED will initialize continuous test printing. Pressing FEED again will
suspend printing.
DESCRIPTION
LC400e Series Operator Manual