SATO LC400e Series Operator's Manual page 78

Hide thumbs Also See for LC400e Series:
Table of Contents

Advertisement

Section 6: Basic Specifications
PRINT
Method
Print Speed (selectable)
Resolution
Non-printable Area
Maximum Print Width
Maximum Print Length
Pitch at EX Command
Print Darkness
RIBBON
(Be sure to use ribbon manufactured or certified by SATO)
Width
Length
Wind Direction
Winding Method
MEDIA
(Be sure to use media manufactured or certified by SATO)
Size
Type
Roll Diameter (Media roll)
Core Diameter (Media roll)
Wind Direction
Page 6-2
Thermal Transfer and Direct Thermal
Caution: Reduce the print speed depending on the pitch size and type of media
used.
LC408e:
8 dots/mm (203 Dots Per Inch)
LC412e:
12 dots/mm (305 Dots Per Inch)
Pitch direction Top: 1.5 mm (0.059") or less, Bottom: 1.5 mm (0.059") or less
(Excluding liner)
Width direction Left: 1.5 mm (0.059") or less, Right: 1.5 mm (0.059") or less
(Excluding liner)
LC408e:
1249 mm (49.17")
LC412e:
833 mm (32.80")
* Use the carbon ribbon wider than the paper to be used.
Label
Continuous
Tear-off/
Cutter/
Dispenser
* Label length may be constrained by media type or operating environment. For
example, label length of longer than 147 mm (5.8") may stick to the front cover
when using the optional dispenser, depending on the media type.
Be sure to confirm by each case when using the label.
Use media roll or fan-fold media specified by SATO.
Maximum outer diameter: 215 mm (8")
50, 75, 100, 125, 150 mm/sec
(2, 3, 4, 5, 6 inches/sec)
104 mm (4")
178 mm (7")
Darkness range: A, B
Darkness level: 1 to 5
111 mm (4.37")
Max. 300 m (984.25 ft.)
Face-In
Rolled onto a core
Width: 22 to 128 mm (0.87" to 5.04")
Width including liner: 25 to 131 mm (0.98" to 5.16")
Pitch: 6 to 178 mm (0.24" to 7.01")
Pitch including liner: 9 to 181 mm (0.35" to 7.13")
Width: 22 to 128 mm (0.87" to 5.04")
Width including liner: 25 to 131 mm (0.98" to 5.16")
Pitch: 17 to 178 mm (0.67" to 7.01")
Pitch including liner: 20 to 181 mm (0.79" to 7.13")
Direct Thermal/Thermal Transfer
Inner core diameter: 76.4 mm (3"),
depending on media type
Face-In
LC400e Series Operator Manual

Advertisement

Table of Contents
loading

Table of Contents