SATO LC400e Series Operator's Manual page 13

1.3 PARTS IDENTIFICATION (cont'd)
Internal view when front cover and top cover are opened (Side view)
11
12
13
14
15

Top cover

Operator panel
It consists of two contact buttons, two LED
indicators, four potentiometers (VR) and two
DIP switches. Please refer to Section 3.1
Operator Panel.

Front cover
Open this cover to access the operator panel,
optional dispenser unit or cutter unit if installed.

Print head (Consumables)
Creates an image directly on the media or by
using a ribbon. Highest print quality is achieved
when regular maintenance is performed.

Platen roller (Consumables)
Feeds the media. Highest print quality is
achieved when regular maintenance is
performed.
LC400e Series Operator Manual

Ribbon supply spindle
Used to load the ribbon.

Media holder
Used to load the media roll.

Media guide
Set to meet the size of the media used.

Ribbon rewind spindle
Used to wind up the used ribbon.

Head lock lever
Used to release the print head assembly.

Front cover lock lever
Press to release the front cover.
Section 1: Introduction
16
17
18
19
20
21
Page 1-5