Table of Contents
Advertisement
5.1 ERROR SIGNAL TROUBLESHOOTING (Cont'd)
ERROR DISPLAYS
ERROR
12
Cover Open
17
Cutter Error
18
Memory Reading
19
No Card
20
Interface
21
Download Data
22
No Card
24
Download Write
25
Rewinder Full
Note
If problems persist after performing the suggested countermeasures, please contact SATO Sales
Representatives for further assistance.
LC400e Series Operator Manual
LED
LCD DISPLAY
COVER OPEN
Red
CUTTER ERROR
Red
DOWNLOAD ERROR
Red
XXXXXXXX ERROR
CARD COPY/FORMAT
Red
NO CARD ERROR
DOWNLOAD ERROR
Red
I/F NOT SUPPORTED
DOWNLOAD ERROR
Red
DATA ERROR
DOWNLOAD ERROR
Red
NO CARD
DOWNLOAD ERROR
Red
WRITE ERROR
REWINDER FULL
Red
Section 5: Troubleshooting
DESCRIPTION
1.
Properly close the front cover.
2.
Replace the front cover open switch.
1. Paper jammed or cutter slit does not
work correctly. Clean the cutter.
1. Delete unnecessary data to free up
memory space.
2.
Make sure the data communication
settings are correct.
1. This printer does not support the
memory card option.
1. Data sequence number does not
match previous data.
2.
Check sent data and
communications setting.
1. Confirm settings are correct.
2.
Retry command.
1. This printer does not support the
memory card option.
1. Confirm settings are correct.
2.
Retry command.
1. Remove the label liner from the
internal rewinder.
Page 5-3
Advertisement
Table of Contents
Troubleshooting
