SATO LC400e Series Operator's Manual page 33

3.4 NORMAL MODE (Cont'd)
MENU
ONLINE
QTY: XXXXXX
OFFLINE
XXXXXX
PRINT DARKNESS
1 2 3 4 5
PRINT SPEED
2 3 4 5 6
PITCH OFFSET
+00mm
CANCEL PRINT JOB
YES NO
LC400e Series Operator Manual
NORMAL MODE
Displays the printer's operational status. The ONLINE status is displayed on the top
line and the label quantity status is on the bottom. The message will be changed to
OFFLINE whenever the printer is switched offline by pressing the LINE button.
When a print job is received, the quantity line will indicate the number of labels to be
printed. As the label job prints, the display status indicates the quantity of labels
remaining to be printed.
Displays the printer's operational status. The OFFLINE status is displayed on the
top line and the label quantity status is on the bottom. The message will be changed
to ONLINE whenever the printer is switched online by pressing the LINE button.
Permits the adjustment of print density. Higher print density equates to darker pint
images.
Permits the printer's printing speed to be established based on inches per second.
The label pitch is the distance from the leading edge (the edge that comes out of the
printer first) of a label and the leading edge of the next label. Once the position has
been set, it can be fine adjusted using the PITCH potentiometer.
Positive (+) digit settings moves the leading edge forward and away from the print
head while a negative (-) setting moves the label's leading edge incrementally back
into the mechanism.
Print data that has previously been received can be cleared. If YES is selected, the
print data will be deleted and then the printer will go offline. If NO option is selected,
the printer will go offline without deleting data in buffer.
Section 3: Operation and Configuration
DESCRIPTION
Page 3-9