SATO LC400e Series Operator's Manual page 45

3.8 COUNTER MODE (Cont'd)
MENU
COUNTERS MODE
COUNTERS
HD DSP CUT LIFE
HEAD COUNTER
XX.XM
DISPENSE COUNTER
XX.XM
CUT COUNTER
X
LIFE COUNTER
XX.XM
HEAD COUNT CLEAR
YES NO
DSP COUNT CLEAR
YES NO
CUT COUNT CLEAR CUT COUNT CLEAR
YES YES NO NO
LC400e Series Operator Manual
COUNTER MODE
Is the first menu screen of the Counter Mode. The Counter Mode allows the printers
various internal counters to be reset to zero or to view count in meters printed thus
far.
Allows the selection of which counter to be viewed and to reset.
HD: Head counter
DSP: Dispense counter
CUT: Cutter counter
LIFE: Life counter
Is an informational screen that provides the printed length of media using the exist-
ing print head.
The head counter should be reset each time the print head is replaced.
Is an informational screen that provides the dispense cycles of media since dis-
penser installation or use.
Is an informational screen that provides the cut cycles of media since cutter installa-
tion or use.
Is an informational screen that provides the printed length of media since printer
setup.
Allows the determination of whether or not to reset the print head counter to zero.
Allows the determination of whether or not to reset the dispense counter to zero.
Allows the determination of whether or not to reset the cutter counter to zero.
Section 3: Operation and Configuration
DESCRIPTION
Page 3-21