SATO LC400e Series Operator's Manual page 51

3.11 MAINTENANCE MODE (Cont'd)
MENU
MAINTENANCE MODE
DIPSW2-4 ON->OFF
FACTORY MODE
ALL CLEAR MODE
ALL CLEAR
COUNTER EEPROM
COUNTER ALLCLEAR
YES NO
EEPROM ALLCLEAR
YES NO
COUNTER ALLCLEAR
COMPLETED
EEPROM ALLCLEAR
COMPLETED
COUNTER CLEAR
NONE
ALL
HEAD
DIS
CUT
LC400e Series Operator Manual
MAINTENANCE MODE
Is the first menu screen of the Maintenance Mode and provides a prompt on the
action required to proceed to the Factory Mode.
This screen is displayed only when using the hardware DIP switch.
The Factory Mode is divided into two sub-menus: the All Clear Mode and the
individual Counter Clear.
The All Clear Mode permits the operator to entirely clear all the printer's internal
counters or to clear its EEPROM of all data.
Counter Clear permits the operator to select individual counters to be reset to zero.
Is a transitional, informational menu screen to inform of the coming menu functions.
Pressing LINE retreats one menu screen to allow the operator to change direction
within the menu.
Pressing FEED advances onward to allow the operator to entirely clear either the
printer's internal counters or its EEPROM data or both.
Allows the selection of the direction to proceed within the menu tree. Selecting
COUNTER will advance to menu screens that will allow the printer's internal
counters to be reset to zero.
Selecting EEPROM will advance to menu screens that will allow the printer's
EEPROM to be emptied of data.
Allows the selection of whether to clear all the printer's internal counters or not.
Select YES to clear and NO to not clear.
Allows the selection of whether to clear all the printer's EEPROM or not. Select
YES to clear and NO to not clear.
Is an informational screen only. Momentarily displays when the printer's internal
counters are reset to zero and then automatically returns to the ALL CLEAR MODE
screen.
Is an informational screen only. Momentarily displays when the printer's EEPROM
has been emptied of data and then automatically returns to the ALL CLEAR MODE
screen.
This screen allows the selection of which of the printer's internal counters is to be
cleared or not at all. Following the process, factory test printing is performed.
Section 3: Operation and Configuration
DESCRIPTION
Page 3-27