SATO LC400e Series Operator's Manual page 38

Section 3: Operation and Configuration
3.6 CARD MODE (Cont'd)
MENU
CARD MODE
MEM SELECT(CC1)
CARD MEMORY
CARD->MEMORYCOPY
TRUETYPEFONT Y/N
CARD->MEMORYCOPY
SATOFONT Y/N
CARD->MEMORYCOPY
ALL Y/N
MEMORY->CARDCOPY
ALL <OMB> Y/N
CARD->MEMORYCOPY
PROGRAM Y/N
MEMORY->CARDCOPY
PROGRAM Y/N
CARD FORMAT
YES NO
MEMORY FORMAT
YES NO
Page 3-14
Is the first menu screen of the Card Mode and it allows the operator to manage or
format the expanded memory card. It is also a transitional menu screen to access
the Service Mode.
Determines the type of optional expanded memory that will be addressed as CC1 in
the command stream. The CARD selection specifies the optional PCMCIA card as
CC1 and the optional expanded Flash ROM as CC2. The MEMORY selection
specifies the optional expanded Flash ROM as CC1 and the optional PCMCIA card
as CC2.
Note:
This printer does not support the memory card option.
Always select N (NO) because optional memory cartridge is not supported.
Always select N (NO) because optional memory cartridge is not supported.
Always select N (NO) because optional memory cartridge is not supported.
Always select N (NO) because optional memory cartridge is not supported.
Always select N (NO) because optional memory cartridge is not supported.
Always select N (NO) because optional memory cartridge is not supported.
Always select NO because optional memory cartridge is not supported.
Before the internal expanded memory may be used, it must be formatted. This
screen allows the determination of whether to format or not based on if it will be uti-
lized.
CARD MODE
DESCRIPTION
LC400e Series Operator Manual