Kyocera Ecosys P3050dn Operation Manual page 154

IPv6 Setting (TCP/IP IPv6 settings)
This selects the settings for TCP/IP (IPv6).
TCP/IP (IPv6) is based on the current Internet protocol, TCP/IP (IPv4). IPv6 is the next-generation Internet protocol and
expands the available address space, which resolves the problem of the lack of addresses under IPv4, while also
introducing other improvements such as additional security functionality and the capacity to prioritize data transmission.
IPv6 Setting:
01 IPv6 Setting
TCP/IP (IPv6) (Enable/disable TCP/IP (IPv6))
This specified whether TCP/IP (IPv6) is used.
IPv6 Setting:
* Off
01
On
02
3
Use the numeric keys or press  or  to set the default gateway.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing  or .
Use  and  to move the position being entered, which is shown
highlighted.
4
Press [OK]. The default gateway is stored and the IPv4 Setting
menu reappears.
1
In the TCP/IP Settings menu, press  or  to select IPv6
Setting.
2
Press [OK]. The IPv6 Setting menu screen appears.
The options available in the TCP/IP (IPv6) settings are as follows:
• TCP/IP (IPv6) (Enable/disable TCP/IP (IPv6))...4-74
• Link Local (Check the IP Address of the machine.)...4-75
Exit
• Manual Settings (Manual Settings of TCP / IP (IPv6))...4-75
• RA (Stateless) (RA (Stateless) setting)...4-76
• DHCPv6 (DHCPv6 setting)...4-77
IMPORTANT The Link Local, Manual Settings, RA (Stateless) and
DHCPv6 menu options for TCP/IP (IPv6) are displayed when TCP/IP
(IPv6) is enabled.
1
In the IPv6 Setting menu, press  or  to select TCP/
IP(IPv6).
2
Press [OK]. The TCP/IP(IPv6) screen appears.
3
Press  or  to select whether TCP/IP (IPv6) is enabled.
4
Press [OK]. The TCP/IP (IPv6) setting is set and the IPv6 Setting
menu reappears.
4-74
Operation Panel