Kyocera Ecosys P3050dn Operation Manual page 195

Retry Interval:
(10 - 60)
Auto Err. Clear (Auto error clear setting)
If an error that still allows you to continue printing occurs, the next received data is automatically printed after a set period
of time elapses.
For example, if the printer is shared over a network as a network printer and one person causes one of the above errors,
after the set period of time elapses, the data sent from the next person is printed.
The auto clear errors are:
KPDL error.
SSD error.
RAM disk error.
SD card error.
Incorrect account ID.
Account error.
Cannot duplex print on this paper.
Job Accounting restriction exceeded.
No multi copies.
USB memory error.
Restricted by Job Accounting.
Job not stored.
For the procedure for setting the automatic error recovery time, refer to Err. Clear Timer (Setting the error clear time) on
page 4-116.
Auto Err. Clear:
* Off
01
02 On
2
50 sec.
3
4
1
2
3
4
Press [OK]. The Retry Interval screen appears.
Press  or  to set the Retry Interval.
Press [OK]. The Retry Interval setting is stored and the Retry
Settings menu reappears.
In the Timer Setting menu, press  or  to select Auto Err.
Clear.
Press [OK]. The Auto Err. Clear screen appears.
Press  or  to select whether automatic error recovery is enabled.
Press [OK]. The automatic error recovery setting is set and the
Timer Setting menu reappears.
4-115
Operation Panel