Kyocera Ecosys P3050dn Operation Manual page 148

Data Encryption:
01 * Disable
WEP
02
WEP Key (WEP Key settings)
This registers the WEP Key.
WEP Key:
- - - - -
WEP Key:
WEP Key Index (WEP Key Index Settings)
Select the key index of the access point.
WEP Key Index:
* 0
01
1
02
03 2
Preshared Key (Preshared Key settings)
This registers the Preshared Key.
2
Press [OK]. The Data Encryption screen appears.
3
Press  or  to select the desired encryption method.
4
Press [OK]. The Encryption menu reappears.
1
In the Encryption menu, press  or  to select WEP Key.
2
Press [OK]. The WEP Key screen appears.
Edit
3
Press[Edit] ([Right Select]). The WEP Key entry screen appears.
ABC
Text
4
Enter the WEP Key using the numeric keys.
5
Press [OK]. The Encryption menu reappears.
1
In the Encryption menu, press  or  to select WEP Key Index.
2
Press [OK]. The WEP Key Index screen appears.
3
Press  or  to select the desired WEP Key Index.
4
Press [OK]. The Encryption menu reappears.
1
In the Encryption menu, press  or  to select Preshared Key.
Note The encryption methods that can be selected vary
depending on the authentication method set in Netwk
Authentic. (Network Authentication setting) on page 4-67.
Disable or WEP can be selected when Open is set.
AES or Auto can be selected when WPA2/WPA-PSK, or
WPA2-PSK is set.
AES can be selected when WPA2-PSK, or WPA2-EAP is set.
Note Up to 26 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
4-68
Operation Panel