Setting Wi-Fi Direct - Kyocera Ecosys P3050dn Operation Manual

Setting Wi-Fi Direct

If you are using the machine with the optional wireless interface kit attached, setting Wi-Fi Direct enables you to print from
the Wi-Fi Direct environment. The configuration methods are as follows:
Configuring the Connection from the Operation Panel on This Machine
Connecting to Computers or Handheld Devices that Support Wi-Fi Direct
Network:
Host Name
01
Wi-Fi Direct Set
02
03 Wi-Fi Settings
Wi-Fi Direct Set:
Wi-Fi Direct
01
02 Device Name
03 IP Address
Wi-Fi Direct:
01 Off
02 * On
Network:
Primary Network
06
07 Ping
Restart Network
08
Restart.
Are you sure?
Yes
1
Press [Menu].
2
Press  or  to select Network.
3
Press [OK]. The Network menu screen appears.
Exit
4
In the Network menu, press  or  to select Wi-Fi Direct Set.
5
Press [OK]. The Wi-Fi Direct Set menu screen appears.
Exit
6
In the Wi-Fi Direct Set menu, press  or  to select Wi-Fi
Direct.
7
Press [OK]. The Wi-Fi Direct screen appears.
8
Press  or  to select On.
9
Press [OK]. The Wi-Fi Direct setting is set and the Wi-Fi
Direct Set menu reappears.
10
Press [Back]. The Network Set menu reappears.
11
In the Network menu, press  or  to select Restart Network.
Exit
12
Press [OK]. A confirmation screen appears.
13
Press [Yes] ([Left Select]). The message Restarting...
Please wait. appears and the network is restarted.
No
2-12
Preparation before Use