Kyocera Ecosys P3050dn Operation Manual page 273

PushButton Setup
If your computer or mobile device does not support Wi-Fi Direct but supports WPS, you can set the network by push-button.
Press the push button
on device and
then press [Next].
Detail Info
It is possible to check the detail information of the Wi-Fi Direct.
Detail Info
NetwkName(SSID)
Direct-KMxxxxxxxxxxxxx
Detail Info
NetwkName(SSID)
Direct-KMxxxxxxxxxxxxx
ConnectionStatus
It is possible to check the status of the Wi-Fi Direct.
ConnectionStatus:
C o n n e c t e d
L i m i t
1
In the Wi-Fi Direct menu, press  or  to select PushButton
Setup.
2
Press [OK]. A confirmation message is displayed.
Next
3
Press [Next] ([Right Select]).
4
When Device Name or NetwkName(SSID) is displayed and the
name is too long to fit on one line, press [Detail] ([Right Select])
to change the name to 3-line display.
1
In the Wi-Fi Direct menu, press  or  to select Detail Info.
2
Press [OK]. The Detail Info screen appears.
The detailed job log covers 6 pages in all. Press  to view to the next
2/ 6
page or  to return to the previous page.
Pressing [OK] returns you to the Wi-Fi Direct menu.
Detail
3
When Device Name or NetwkName(SSID) is displayed and the
name is too long to fit on one line, press [Detail] ([Right Select])
2/ 6
to change the name to 3-line display.
Detail
1
In the Wi-Fi Direct menu, press  or  to select
ConnectionStatus.
2
Press [OK]. The ConnectionStatus screen appears.
Press [Menu] ([Right Select]) to display the following items.
3
• Disconnect All (disconnect all Wi-Fi Direct connections)
3 • ConnectedDevices (display connected devices)"
Menu
6-7
Status Menu