Kyocera Ecosys P3050dn Operation Manual page 182

Format SD Card (Formatting the SD card)
The printer is equipped with a slot for an SD card.
A SD card must be formatted before it can be used in the printer. Formatting allows data to be written to the SD card.
Note Formatting will destroy any existing data on a storage device including a used SD card.
Formatting of the SD card must be executed from the printer.
When a new SD card is inserted in the printer's slot, Format SD Card will appear on the message display.
Format.
Are you sure?
SD Card
Yes
Display Bright. (Display brightness setting)
Sets the brightness of the message display.
Display Bright.:
Darker -2
01
Darker -1
02
03 *Normal 0
1
In the Device Common menu, press  or  to select Format SD
Card.
2
Press [OK]. A confirmation screen appears.
No
3
Press [Yes] ([Left Select]). The Formatting SD card...
screen appears and SD card formatting begins. Once the formatting
ends, the standby screen reappears.
Pressing [No] ([Right Select]) returns to the Device Common
menu without formatting the SD card.
1
In the Device Common menu, press  or  to select Display
Bright..
2
Press [OK]. The Display Bright. screen appears showing the
available brightness settings.
The list shows the following brightness settings:
Darker -2
Darker -1
Normal 0
Lighter +1
Lighter +2
3
Press  or  to select the desired brightness.
4
Press [OK]. The brightness is set and the Device Common menu
reappears.
4-102
Operation Panel