Kyocera Ecosys P3050dn Operation Manual page 184

DuplexPaperError:
01 * 1-sided
Display Error
02
Paper Mismatch (Detection settings for paper size/type errors when the paper source is
fixed)
Select Continue in this setting if you want to continue printing even if the paper size or type you specified is different from
the fixed paper source, or select Display Error to have the paper feed error displayed.
Paper Mismatch:
* Continue
01
02 Display Error
InsertMismatch (Action when size error occurs during paper feeding)
If the paper size you specified is different from the size of the paper that is fed when printing using a fixed paper source, you
can select Continue to continue printing, or Display Error to have the paper feed error displayed.
InsertMismatch:
* Continue
01
02 Display Error
MP Tray Empty (Warning when the MP tray is empty)
Turn this setting to On if you want the error displayed when the MP tray is configured as the default paper source, and there
is no paper in the MP tray, or turn it to Off not to have the error displayed.
The setting On enables the paper-empty message to display when the MP tray is empty.
2
Press [OK]. The DuplexPaperError screen appears.
3
Press  or  to select the setting for handling duplex paper errors.
4
Press [OK]. The handling of duplex paper errors is set and the Error
Handling menu screen reappears.
1
In the Error Handling menu, press  or  to select Paper
Mismatch.
2
Press [OK]. The Paper Mismatch screen appears.
3
Press  or  to select the setting for handling paper mismatch
errors.
4
Press [OK]. The handling of paper mismatch errors is set and the
Error Handling menu screen reappears.
1
In the Error Handling menu, press  or  to select
InsertMismatch.
2
Press [OK]. The InsertMismatch screen appears.
3
Press  or  to select the setting for handling Insert Mismatch
errors.
4
Press [OK]. The handling of Insert Mismatch errors is set and the
Error Handling menu screen reappears.
1
In the Error Handling menu, press  or  to select MP Tray
Empty.
4-104
Operation Panel