Kyocera Ecosys P3050dn Operation Manual page 96

Job Log History (Sending Job Log History)
This sets the sending of the Job Log History.
Note When user login administration is enabled, Job Log History is displayed when logged in with
administrator authority.
To send E-mail from this machine, set the SMTP setting to On. For details, refer to the ProtocolSettings (Detailed
settings for the network protocol) on page 4-78.
It is necessary to register a mail server. For the method for setting the server, refer to the section on Command
Center RX on page 2-28.
The options available in the Job Log History menu are as follows:
• Auto Sending (Automatic Sending of Job Log History)...4-16
• Send History (Sending job log history)...4-17
• Destination (Setting the destination)...4-18
• Subject (Setting job log subject)...4-19
• Personal Info. (Personal information setting)...4-20
Job Log History:
01 Auto Sending
Send History
02
Destination
03
Auto Sending (Automatic Sending of Job Log History)
This function automatically sends the job log history to the specified destination whenever a set number of jobs has been
logged. Set the destinations in advance by referring to Destination (Setting the destination) on page 4-18.
Auto Sending:
01 Off/On
Off/On:
01 * Off
On
02
Job Log History:
Auto Sending
01
Send History
02
03 Destination
1
In the Report menu, press  or  to select Job Log History.
2
Press [OK]. The Job Log History menu appears.
Exit
1
In the Job Log History menu, press  or  to select Auto
Sending.
2
Press [OK]. The Auto Sending menu appears.
Exit
3
Press  or  to select Off/On.
4
Press [OK]. The Off/On screen appears.
5
Press  or  to select On or Off.
6
Press [OK]. The Auto Sending is set and the Job Log History
menu reappears.
If On is selected, continue on and select the settings.
Exit
7
Press  or  to select Auto Sending.
Note If something other than Show All is set at Disp.
Status/Log (Display Status/Log setting) (page 4-117), then
the log in screen appears. Enter the login user name and
password, and press [Login] ([Right Select]).
4-16
Operation Panel