Op Functions (Optional Application Settings) - Kyocera Ecosys P3050dn Operation Manual

Op Functions (Optional application settings)

You can use the optional applications installed on this machine.
Application
The applications listed below are installed on this machine.
• DATA SECURITY (Data Security Kit(E))
• ID Card (Card Authentication Kit(B))
• UG-33 (ThinPrint)
There are also some applications that can be used for a limited trial period.
Note Restrictions such as the number of times the application can be used during the trial period differ depending
on the application.
The options available in Op Functions menu are as follows:
• Starting Application Use...4-154
• Checking Application Details...4-156
Starting Application Use
Use the procedure below to start using an application.
Login User Name:
Login Password:
Login User Name:
1
Press [Menu].
2
Press  or  to select Op Functions.
3
Press [OK]. The Login screen appears.
Login
4
With the Login User Name entry field selected, press [OK]. The
Login User Name entry screen is displayed.
ABC
Text
5
Enter the Login User Name using the numeric keys then press [OK].
The log in screen reappears.
Note When user login administration is set:
• When logged in as an administrator, the log in screen is
not displayed and the Op Functions menu screen is
displayed.
• The setting is not possible when logged in as anyone other
than an administrator. Log in again as an administrator.
Note The initial setting for the administrator's Login User
Name is set as shown below.
ECOSYS P3045dn: 4500
ECOSYS P3050dn: 5000
ECOSYS P3055dn 5500
ECOSYS P3060dn: 6000.
For details on entering characters, refer to Character Entry
Method on page A-2.
4-154
Operation Panel