Subaru WRX-STI Owner's Manual page 236

3-108
Instruments and controls/Wiper and washer
Australia models
/ MIST: Mist (for a single wipe)
/ OFF: Off
/ AUTO: Automatic operation
/ LO: Low speed
/ HI: High speed
To turn the wipers on, push the wiper
control lever down. With the wiper switch
in the AUTO position, the wipers operate
automatically when the rain light sensor
detects falling rain. The wiper timing is
automatically adjusted depending on the
amount of rain.
To turn the wipers off, return the lever to
the OFF / position.
For a single wipe of the wipers, push the
lever up. The wipers operate until you
release the lever.
NOTE
The automatic adjusting mode of the
wiper timing can be changed from the
rain-sensing mode to the vehicle speed
interlocking mode. The setting can be
changed by a SUBARU dealer. For
more details, we recommend that you
contact a SUBARU dealer.
! Rain light sensor
The rain light sensor is on the windshield
glass.
! Sensor sensitivity control
1) Except Australia models
2) Australia models
Turn the dial to adjust the sensitivity of the
rain light sensor for wiper control. Turn the
dial downward to increase the sensitivity.
Turn the dial upward to decrease the
sensitivity.