Manual Mode - Subaru WRX-STI Owner's Manual

mode, AUTO [+] appears.
Pull the control switch rearward to select
the AUTO [−] mode. After setting the
mode, AUTO [−] appears.
When the AUTO [+] mode is selected,
pull the control switch rearward to change
to the AUTO mode. When the AUTO
[−] mode is set, push the control switch
forward to change to the AUTO mode.
Starting and operating/Driver's Control Center Differential (C.DIFF/DCCD) (STI)
& Manual mode
In the manual mode, you can use the
center differential control switch to adjust
the initial LSD torque as desired. When
this mode is selected, the AUTO indica-
tor disappears.
! Center differential control switch
and indicator
The control switch is located beside the
parking brake lever. By pushing the
control switch forward or pulling it rear-
ward, it is possible to change the initial
LSD torque.
The center differential indicator on the
combination meter gives six levels of
indication. The indicator and control
switch are linked; when the switch is
pushed or pulled to change the initial
LSD torque, the indicator changes accord-
ingly.
– CONTINUED –
7-17