Folding Down The Rear Seatback - Subaru WRX-STI Owner's Manual

Table of Contents

Advertisement

1-12
Seat, seatbelt and SRS airbags/Rear seats
When the seats are not occupied, lower
the head restraints to improve rearward
visibility.
! Rear center seating position
CAUTION
The head restraint is not intended to
be used in the retracted position.
Before sitting on the seat, raise the
head restraint to the extended posi-
tion.
1)
Incorrect (retracted position)
2)
Correct (extended position)
1)
Head restraint
2)
Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while
pressing the release button on the top of
the seatback.
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks. Press and hold
the release button to lower the head
restraint.
When the rear center seating position is
not occupied, lower the head restraint to
improve rearward visibility.
& Folding down the rear seat-
back
WARNING
. When you fold down the seat-
back, check that there are no
passengers or objects on the
rear seat. Not doing so creates
a risk of injury or property da-
mage if the seatback suddenly
folds down.
. Never allow passengers to ride
on the folded rear seatback or in
the trunk. Doing so may result in
serious injury or death.
. Secure all objects and especially
long items properly to prevent
them from being thrown around
inside the vehicle and causing
serious injury during a sudden
stop, a sudden steering maneu-
ver or a rapid acceleration.

Advertisement

Table of Contents
loading

Table of Contents